DTB Firmware for Dstv and Gotv for free channels

 

DSTV AND GOTV  FREE CHANNELS AT YOUR HOME.DTB FIRMWARE PROCESS

To watch free channels on dstv or gotv you will be required to have some piece of a firmware in bin that will unlock all your channels. 

To get the firmware just join the telegram group via the link bellow and enjoy the goodness of you tv.

Here is the link https://t.me/+rjMZHgPJAaUzNGM0

To have all this done for your tv, have the following requirements;

Your decoder must include a USB port or a memory card slot. 

You'll then need the DTB firmware downloaded above, as well as a few remote-control skills, to go premium on your decoder for free.

If your decorder has a USB port, use a flash.

And if you can use a memory card slot it is also good.

Procedure;

This technique will allow you to unlock DsTV and GoTV decoders. 

While the memory stick or flash drive is in the decoder and the decoder is powered on, grab the remote and scroll to the settings.

 Select the USB upgrade option from the upgrade section. 

Make sure you really want to move away from USB storage. 

The procedure for upgrading will begin. It will only take a few minutes to complete. 

Do not cutoff power supply untill the process is done.

If you're concerned about the new upgrade, bear in mind that if you don't want to keep paying, you can always restore the decoder to factory settings.

NOTE: This is for study purpose only and any action taken does not involve this blog.